Spatial geometric arrangements of disulfide-crosslinked loops in nonplanar proteins

The method presented earlier [T. Kikuchi, G. Némethy, and H.A. Scheraga, (1986) J. Comput. Chem. 7 , 67] for the classification of patterns of the three-dimensional folding of a covalently crosslinked polypeptide chain has been extended to nonplanar proteins. The procedure described earlier was applicable only to proteins termed planar, i.e., with a connexity of the crosslinks (e.g., disulfide bonds) that can be represented in a planar diagram. The procedure described in the present work is applicable to any (planar or nonplanar) pattern of crosslinking. The classification is based on a systematic and objective method of enumeration of spatial geometric arrangements of loops (SGAL) using no information other than the location of the disulfide bonds in the amino acid sequence. Various SGAL classes correspond to the presence of different ways of mutual penetration of loops, called thrustings and entanglements. Information on SGAL classes can be of use in structural predictions of folding patterns of proteins.     

3-Aroylmethyl derivatives of 2(1H)quinoxalinone and 2H-l,4-benzoxazin-2-ones existing in the enamine form

Seventeen derivatives of 2(1H)quinoxalinone and 2H-l,4-benzoxazin-2-one have been synthesized for structural study. All of the compounds having a substituted phenacyl, isonicotinoylmethyl, or 2-furoylmethyl side chain are shown to exist in the enamine form with an internal chelation both in the crystalline and solution states as evidenced by the ir and pmr spectra, respectively. In the gas phase, however, o-hydroxyphenacyl derivatives can exist in another type of intramolecularly hydrogen-bonded form which is supported by their mass spectra.     

Characterization of tension and normally lignified wood cellulose inPopulus maximowiczii

We have investigated unlignified tension wood and normally lignified wood celluloses inPopulus maximowiczii with particular reference to the composition of two crystalline phases I/I (triclinic/ monoclinic). Four independent techniques, which enable us to detect the two phases, CP/MAS¹³C NMR, Fourier transform infrared microscopy, selected-area electron diffraction, and X-ray diffraction were applied. Because of the low crystallinity of wood celluloses, particularly in the case of celluloses in the lignified cell wall, no single method was decisive enough to be able to determine the composition of the two phases as one can with highly crystalline materials. The I dominant structure (monoclinic crystal type) was, however, preferred for both tension and normal wood celluloses.     

A theorem on the average number of subfaces in arrangements and oriented matroids

It is known that for simple arrangements in thed-dimensional Euclidean spaceR ^d The average number ofj-dimensional subfaces of ak-dimensional face is less than . In this paper, we show that this is also true for all arrangements inR ^d and for all oriented matroids, and we give combinatorial proofs.     

Optimization of in-gel protein digestion system in combination with thin-gel separation and negative staining in 96-well plate format

Improvement of in-gel digestion efficiency is highly desirable for one- or two-dimensional gel electrophoretic separation and mass spectrometric (MS) analysis in proteomics, because the resultant increases in sequence coverage and MS signal intensity lead to higher confidence in protein identification. Here an optimized in-gel digestion system, in combination with thin-gel separation and negative staining in a high-throughput format using 96-well plates, is described. The combination of negative staining and protein separation on a 0.9 mm thick gel showed a clear improvement in in-gel digestion efficiency in comparison with the more typical protocols such as the combination of silver staining and a 1.0 mm gel. In addition, the use of 96-well plates to increase throughput did not decrease the efficiency of this strategy when the stirring of the gel pieces in processes such as destaining, washing, gel-shrinking and peptide extraction was performed by sonication instead of shaking the plates. This procedure was optimized and applied to identify proteins of the postsynaptic density fraction; 105 proteins were identified after SDS-PAGE separation.     

Post-oxidative conversion of thiol residue to sulfonic acid in the binding sites of molecularly imprinted polymers: disulfide based covalent molecular imprinting for basic compounds

An imprinted polymer using a disulfide derivative as a template was treated with NaBH4 to yield the polymer with thiol groups in the binding sites. The thiol groups were then oxidized with H2O2/AcOH to yield the molecularly imprinted polymer with sulfo groups in the binding sites. This site conversion can provide amine-imprinted polymers, in which amine is retained to the imprinted polymer by the strong electrostatic interaction between the amino group and the sulfo group in the binding sites.     

Radiation-induced heterogeneous polymerization of acrylamide in acetone and acetone–water mixtures

The effects of temperature, dose rate, and monomer concentration on the heterogeneous polymerization of acrylamide in acetone–water mixtures have been studied. Heterogeneous polymerization takes place in mixtures containing less than 60 vol-% water. The polymerization is steady in acetone and nonsteady in acetone an nonsteady in mixtures containing 10–50 vol-% water. The average rate of polymerization is highest in mixtures with about 20 vol-% water. Polymer molecular weight increases with the increasing water content in range 0–10 vol-% and does not change in the range of 30–70 vol-% water. For the polymerization in acetone and an acetone–water 60/40 mixture the activation energies are 2.3 and ?1.8 kcal/mole, the dose rate exponents of rate are 0.78 and 0.52, and the monomer concentration exponents of rate are 0.5 and 1.6, respectively. The polymer molecular weight increases with decreasing dose rate, decreasing temperature, and increasing monomer concentration. These results are discussed in connection with the mechanism of heterogeneous polymerization and the solvent effect.     

A long-range-corrected time-dependent density functional theory

We apply the long-range correction (LC) scheme for exchange functionals of density functional theory to time-dependent density functional theory (TDDFT) and examine its efficiency in dealing with the serious problems of TDDFT, i.e., the underestimations of Rydberg excitation energies, oscillator strengths, and charge-transfer excitation energies. By calculating vertical excitation energies of typical molecules, it was found that LC-TDDFT gives accurate excitation energies, within an error of 0.5 eV, and reasonable oscillator strengths, while TDDFT employing a pure functional provides 1.5 eV lower excitation energies and two orders of magnitude lower oscillator strengths for the Rydberg excitations. It was also found that LC-TDDFT clearly reproduces the correct asymptotic behavior of the charge-transfer excitation energy of ethylene-tetrafluoroethylene dimer for the long intramolecular distance, unlike a conventional far-nucleus asymptotic correction scheme. It is, therefore, presumed that poor TDDFT results for pure functionals may be due to their lack of a long-range orbital-orbital interaction.     

Effects of a Single Exposure to UVB Radiation on the Activities and Protein Levels of Copper-Zinc and Manganese Superoxide Dismutase in Cultured Human Keratinocytes

Abstract— Ultraviolet B irradiation has been believed to decrease or impair the activity of reactive oxygen species (ROS) scavenging enzymes such as superoxide dismutase (SOD) in the skin. It has been recently reported that two isozymes of SOD, namely copper-zinc SOD (Cu-Zn SOD) and manganese SOD (Mn SOD), exist in mammalian cells and that the two enzymes play different roles in living systems. The aim of this study was to investigate changes in SOD activities and protein levels in cultured human keratinocytes after acute UVB irradiation. In addition, the protein levels of Cu-Zn SOD and Mn SOD were quantified separately. A single exposure to UVB irradiation produced an increase in SOD activity and protein level that peaked immediately after UVB irradiation, after which a decline was observed, with subsequent recovery to baseline levels 24 h after irradiation. In individual assays of Mn SOD and Cu-Zn SOD, the amount of Mn SOD protein decreased and then gradually recovered 24 h after irradiation. In contrast, the amount of Cu-Zn SOD protein increased immediately after UVB irradiation, and then gradually declined. To evaluate the mechanisms of these changes, we examined the effects of the cytokines, interleukin-1α (IL-1α) and tumor necrosis factor-α (TNF-α), which can be secreted from keratinocytes after UVB irradiation, on the SOD activity and protein levels in keratinocytes. Interleukin-la and TNF-α enhanced both the SOD activity and protein level of Mn SOD, while these cytokines had no effect on Cu-Zn SOD protein levels in cultured human keratinocytes after incubation for 24 h. Furthermore, when neutralizing antibodies against IL-1α and TNF-α were added separately or together to the culture medium before UVB irradiation, the recovery of total SOD activity and Mn SOD protein level were markedly inhibited 24 h after irradiation. Our results suggest that significant increases in SOD activity and protein level occur as a cutaneous antioxidant defense mechanism that protects against the cytotoxicity as a result of UVB irradiation, and that this increase in SOD is attributed to Cu-Zn SOD. The Cu-Zn SOD and Mn SOD protein levels changed in a different manner after UVB irradiation. The former may participate in an early phase and the latter in a late phase defense mechanism directed against oxidant cytotoxicity through UVB irradiation. In addition, the recovery of Mn SOD to baseline levels 24 h after UVB irradiation seems to be mediated through cytokines such as IL-1α and TNF-α, which are secreted from keratinocytes.     

Isolation, characterization, and theoretical study of La2@C78

A new metallofullerene, La2@C78, has been synthesized by DC arc discharge method, isolated by high-performance liquid chromatography, and characterized by laser desorption time-of-flight mass spectrometry, UV-vis-NIR absorption, differential pulse voltammetry, 13C NMR spectroscopy, and theoretical calculations. The La2@C78/CS2 solution is dark violet and presents several characteristic absorption features at 647, 561, 533, and 386 nm, with an onset around 1000 nm. With respect to empty D3-C78, the capability of La2@C78 as an electron acceptor or donor is stronger. Addition of 1,1,2,2-tetrakis(2,4,6-trimethylphenyl)-1,2-disirane to La2@C78 photochemically, as well as thermally, affords bis- and mono-adducts. Theoretical studies and 13C NMR spectroscopic analysis of La2@C78 indicate that it possesses a D3h-C78 cage (78:5).